Kayak Manual Bilge Pump

To use a kayak bilge pump, hold the bottom of the pump in the water that has pooled inside your boat. With your other hand, press the pump handle down, then lift it back up. This pumping action suctions the water from the interior of the boat and expels it over the side.

SAILINGFLO Kayak Hand Pump Specifications:

Material:Nylon Plastic + EVA

Unextended Length:42cm

Extended Length:68cm

Diameter:6.3cm/2 .48"

lDrainage Volume:approx.0.4L

Manual Bilge Pump Feature

1.Compact and lightweight. Easy to carry.

2.Gear design of bump inlet, can suck more water quickly and efficiently.

3. Antiskid outer EVA wrappage, could increase floating ability.

4.Anti-leak design removable gasket, could prevent water flowing out of water inlet.

5.A great safety equipment to rescue yourself when you are in danger of kayak swamping.

6.Special Tube surface, easier to grip the pump and not easy slip,even your hand is sweated.

7. Ergonomic designed handle, ensures comfort and eliminates unnecessary hand strain and fatigue.

Properly Stow Your Bilge Pump

Before you head out on the water be sure to securely stow your bilge pump in your canoe or kayak. If you are in a kayak, placing it under the bungee cords on the back deck of the kayak is usually a good place for it. While a bilge pump can be placed under the bow bungee cords, it tends to get in the way there. If in a canoe, you can clip or tie the bilge pump into the canoe. Whether in a canoe or a kayak, the bilge pump should be easily accessible and not packed away in a dry bag or hatch.